Bitcoin Ecosystem is about to shift gear with decentralised exchanges and atomic swaps

Atomic Swaps

Atomic swaps, or atomic cross-chain trading, is the exchange of one cryptocurrency to another cryptocurrency, without the need to trust a third-party. A relatively new piece of technology, atomic cross-chain trading is looking to revolutionize the way in which users transact with each other. 

For example, if Alice owned 5 Bitcoins but instead wanted 100 Litecoins, she would have to go through an exchange, i.e. a third-party. However, with atomic swaps, if Bob owned 100 Litecoins but instead wanted 5 Bitcoins, then Bob and Alice could make a trade. In order to prevent, for example, Alice accepting Bob’s 100 Litecoins but then failing to send over her 5 Bitcoins, atomic swaps utilizes what is known as hash time-locked contracts (HTLCs).

Hash time-locked contracts ensure that the atomic swap process is completely trustless by ensuring both fulfill the requirements of the trade. HTLCs require the recipient of a payment to acknowledge receiving payment prior to a deadline by generating a cryptographic proof of payment. Or the recipient risks losing the right to the claim the payment, therefore returning the funds back to the sender.

Therefore, for a trade between Alice and Bob to take place, both must submit their transaction to their respective blockchain, Alice on the Bitcoin blockchain and Bob on the Litecoin blockchain. In order for Alice to claim the 100 Litecoins sent from Bob, she must produce a number that only she knows, used to generate a cryptographic hash, therefore providing proof of payment. Similarly, in order for Bob to claim the 5 Bitcoins that was sent from Alice, he must also provide the same number, that was used to generate the cryptographic hash.

Requirements for atomic swaps

As exciting as this technology is, there are some fundamental requirements for a cryptocurrency before it can successfully support atomic swaps. One such requirement is the implementation of the Lightning network.

If a hash time-locked contract can be thought of as linking two blockchains together, the lightning network can be thought of as linking payment channels together. That is, for Alice and Bob to transact with each other, they must be linked through payment channels. The lightning network allows for that.

In addition, for a transaction to occur between two different blockchains, it is necessary for both blockchains to share the same cryptographic hash function, such as SHA-256. This is to allow for the hash-time locked contract to function properly when it comes to the user providing the number that was generated via the hash function.

Where are we now

If recent news is anything to go by, the future of atomic cross-chain trading looks bright. Creator of Litecoin, Charlie Lee, successfully completed atomic swaps using Litecoin in exchange for Bitcoin, Vertcoin and Decred. With continued innovation, the desire is that the technology of atomic swaps will allow us to run decentralized exchanges that will be convenient for the average user. However, the caveat to the recent success of atomic swaps is that all those swaps required local coin daemons. What this means is, in order for the average user to perform an atomic swap between two cryptocurrencies, they would be required to download the blockchains of either currency. As you may have guessed, this process is not very practical for the average user. However, a recent successful atomic swap may have provided the solution to this problem.

The Komodo team, who themselves are currently attempting to build their own decentralized exchange called BarterDEX, is ahead of the pack having successfully completed an atomic swap using an Electrum server. This is important because the Electrum server allows a user to interact with a cryptocurrency without having to download the whole blockchain. Therefore, this makes the prospect of a decentralized exchange all the more practical. 

To conclude, there are a plethora of decentralized exchanges that are utilizing this technology in-order to completely change the way we as users transact. Projects such as Blocknet, who are looking to create the internet of blockchains through the use of atomic swaps. Even the creation of semi-decentralized exchanges such as Lykke, who charge 0% commission on trades. It goes without saying that blockchain technology, but more specifically, atomic cross-chain trading, is a space to watch.

Atomic swaps between blockchains have become a hot topic that has sparked a lot of interest due to the decentralized nature of the exchange process. This week a developer that goes by the name of “Deswurstes” or “MCCCS” has accomplished a successful bitcoin cash atomic swap test.

Introducing Bitcoin Cash to the Atomic Swap Protocol

On November 4, bitcoin cash (BCC) was tested using the Decred/atomic swap protocol by a developer named Deswurstes. The atomic swap Github pull request #37states, “the first Bitcoin Cash atomic swap has been made! — Proof at the end of this pull request.” Deswurstes says he’s been interested in the scaling debate since mid-2016 and has been a bitcoin fanatic (as a small scale miner/holder, not a developer) since then. The test is one of the developer’s first contributions using the bitcoin cash code, and he plans to design friendlier-looking software to allow users to use it more efficiently.

“Atomic swaps are interesting topics, and there are many alt-to-alt exchanges, but none of them are safe; there’s nothing that prevents the exchange from stealing your money,” Deswurstes explains to news.Bitcoin.com.

When I found atomic swaps, it looked like magic to me. I thought it’d be cool if bitcoin cash had this feature. First I asked its developers if they were going to implement bitcoin cash support, but they were busy. One or two weeks later, I tried and succeeded in coding my atomic swap dream.

‘In the Future, All Altcoin-to-Altcoin Atomic Swaps Will be Instant’

The developer’s first test was a bitcoin cash-to-bitcoin cash atomic swap contract. He tested it like this because it enabled him to debug both initiate and participate commands at the same time, and each time he got closer to the working software. “Currently the software works awesome, however, it doesn’t have dynamic fee support,” Deswurstes explains to news.Bitcoin.com. “The command that makes the node software choose inputs for the transaction (fundrawtransaction) has different syntaxes in different node software.”

Deswurstes says now, people can make trustless bitcoin cash payments, but the process of compiling the software and typing commands in the command prompt is complicated for average users. “When trustless, decentralized exchanges that have order matching come with good UIs, the atomic swap will replace the current exchanges — Especially BCC-BTC will have high volume,” the programmer explains.

In the future, all alt-to-alt atomic swaps will be instant — People will be trading BTC and BCC, which’ll be the highest volume trade, in a few seconds.

Cryptocurrency Exchanges Will Have to Utilize Atomic Swaps, or No One Will Use Them

Deswurstes believes atomic swaps just need a good user interface (UI), and after a nice looking and easy to use UI is implemented there’s nothing that can prevent everyone from using atomic swaps, the developer explains. At the moment Deswurstes notes there are two startups working on friendlier atomic swap UI’s including Barterdex, and Altcoin.io.

“One day, all of the alt-to-alt exchanges will use atomic swaps, because of its safeness and it will be as convenient as the old style trades. There’s no reason for them not to use atomic swaps — If they won’t, their users will no longer use them,” Deswurstes concludes.

BarterDEX

Atomic Swap Decentralized Exchange of Native Coins

jl777 30th Oct, 2017 | v2.0

Abstract

In this whitepaper we describe the implementation of a decentralized exchange that would allow people to trade coins without a counterparty risk. A fully featured service would need to decentralize order matching, trade clearing, and settlement. The order matching would be done through low level pubkey to pubkey messaging protocol and the final settlement through an atomic cross chain protocol. Like any exchange, a decentralized alternative also needs liquidity providers to ensure it has enough liquidity.

Executive Summary

1. Introduction
2. The Complete Solution
3. Improvements implemented in barterDEX
4. BarterDEX API
5. Order Matching
6. Atomic Swaps
1. Overview of atomic swaps protocol
2. Detailed explanation of atomic swaps protocol
7. DEX fee - dexfee
8. Transaction Confirmations
9. Zero Transaction Confirmations
10. Real-time Metrics
11. Efficiency of Orderbook

Acknowledgements

1. References

Introduction

Money should be exchanged freely and safely from person to person, and currently the most practical method for it is a central exchange. Such centralized solution requires the funds to be exchanged into IOU tokens that are backed by the exchange service provider. Thus, the clients are under a constant risk of their assets being stolen either by an inside theft or an outside hack. In order to remove these risks, a decentralized alternative must be established.

Among all the exchanges, the trading tends to be centralized in a few exchanges – and there is a reason for it. The speed advantage of trading the exchange IOU attracts the traders, and the traders attract liquidity, which creates the best prices, which attracts even more traders. This network effect is the reason that a few centralized exchanges have been dominating the trading volumes, while all smaller exchanges, both centralized and decentralized, are suffering from lack of liquidity.

A decentralized trading environment was created in 2014 by a service called MultiGateway, that utilized the Nxt Asset Exchange. With the Nxt Asset Exchange it is possible to do decentralized trading, using proxy tokens to represent external cryptocurrencies like Bitcoin. This hybrid solution is being increasingly used by many other blockchain platforms.

One problem with this type of solution, however, is that it loses the speed of a centralized exchange. And another problem is that the storage of external cryptocurrencies is not decentralized, but only distributed at best, which maintains a degree of counterparty risk for the users. This, combined with the need to use a set of gateways to convert the external, native coins to and from the proxy tokens has made it an impractical solution.

The conclusion is that a decentralized alternative that lacks speed cannot compete with the convenience of existing centralized exchanges, and that simply reducing the counterparty risks it is not enough to attract liquidity.

The Complete Solution

BarterDEX combines three key components: order matching, trade clearing and liquidity provision into a single integrated system that allows users to make a coin conversion request, find a suitable match and complete the trade using an atomic cross-chain protocol. Additionally, there is a privacy layer in the order matching so that two nodes can do a peer-to-peer atomic swap without any direct IP contact between them.

Order matching is the process of pairing buy orders with sell orders. It is done by algorithms that define how the orders are paired, and in which order they get filled. A trade is said to become ‘executed’ once it gets filled.

After execution comes trade clearing, which is the process from the promise of payment to the actual money transfer or settlement, where the assets are swapped between the trading parties.

A liquidity provider (LP) is a trading party that acts as a market maker buying and selling assets. They provide liquidity to the exchange, and make their profit from the spread between bid and ask orders. LP’s bring price stability and make easier for traders to execute trades.

Improvements implemented in barterDEX

barterDEX is the result of years of development and iterated versions, with each iteration adding the next layer of required functionality to achieve the goal of large-scale adoption.

With this incarnation, barterDEX adds support for SPV Electrum based coins in addition to dozens of normal bitcoin protocol coins running native coin daemons. Internally the “SPV”-ness of a coin is abstracted so that most of the API calls work transparently for SPV mode coins and native coin daemons. It also implements Liquidity Multiplication that allows the same funds to be used for asks in multiple "orderbooks", where the first to fill gets the trade. This allows 100 BTC worth of funds to create thousands of BTC worth of liquidity and provides a special advantage for traders that like to wait for below market dumps. While this feature is something that any other exchange could implement, very few if any do. All orderbook entries are 100% backed by real funds, yet the same funds can be part of 25 different "orderbooks".

With the obvious exception of the electrum API call itself and some differences in the returned JSON for calls like “listunspent”, it is possible to create an API model that is the same for all coins. In no particular order, the following is the list of API calls, with their parameters.

BarterDEX API

Please refer to detailed barterDEX API document here.

Further, coins with the different lower level transaction and block differences are all mapped to a universal coin model and for all API, just specifying the “coin” symbol is enough to get the same response. Bitcoin protocol is required, but even older coins without the CheckLockTimeVerify(CLTV) active can work on the liquidity taker side.

The requirements for a coin to work in native mode are to have gettxout RPC call and if it has CLTV opcode it can be both the liquidity provider (bob) and the liquidity taker (alice). For coins using SPV, only liquidity taking is currently supported for overall network performance reasons. Also, the logic is that anybody that is serious about trading should be serious enough to install the coin daemon for the coins they are trading.

Order Matching

Before we get into the atomic swap details, there is another aspect of barterDEX that is quite critical and that is the decentralized orderbook. In order to achieve this, barterDEX creates a custom peer to peer network that has the analogue of a full relay node and a node that doesn't relay. Network load on this network is minimized using a combination of hierarchical transmission of the orderbooks, along with fetching of data. Also, there are several different methods to obtain data to maximize the number of nodes that are able to fully connect to the barterDEX network.

One aside to mention is that it is possible to create a totally separate set of barterDEX nodes by seeding the network with a totally independent set of seed nodes. This enables scaling of barterDEX to arbitrary levels as, if any scaling limit is reached, it is a matter to create a separate network that doesn't directly interconnect with the other. At such scale, the assumption is that there is plenty of inventory in the orderbooks, especially if the partitioning is done on a per-reference coin basis. In the event it is desired to cross-pollinate orderbook entries from disparate barterDEX networks, it would be possible to have special bridge nodes that cherry pick the desired entries from one network to the other.

Since addressing in the barterDEX network is via a Curve25519 pubkey, the IP address of a node does not matter and for non-relaying nodes it is never part of any barterDEX protocol packet. Only a malicious relay node that is monitoring IP addresses at the low level would be able to link IP address to pubkeys. However, barterDEX is about trading using the blockchain, which is a public activity. Do not assume there is any privacy due to barterDEX. For privacy, use JUMBLR.

Anybody that wants to can run a full relaying node, there is no specific payment to do this and it does require more bandwidth. However, by being a full relaying node, you have better connectivity with all the other nodes and thus a higher percentage chance of having a trade started and completed. This increase in reliability would be enough for active traders and also for significant owners of the DEX asset, just making sure there are enough full nodes is a good thing to do.

A non-relaying node is able to do everything a full relaying node can do, so we expect that the vast majority of nodes will be non-relaying nodes and this will enable the barterDEX network to scale to a large number of total nodes. With 100 full nodes, thousands of non-relay nodes can be supported, possibly tens of thousands, though that number has not been reached in practice, so we will have to wait and see what the real world limitations are.

A third significant part of barterDEX is the iguana code base that it was forked from. This enables a specialty wallet that handles all the supported coins to be created using a totally self-contained set of source code. All of the atomic swap protocol transactions are custom raw transactions that are created and signed by the iguana code. By utilizing the "withdraw" API command, it is possible for a general purpose wallet to be created that uses the barterDEX API. It uses a passphrase generated privkey, so there is no wallet.dat that barterDEX itself maintains and it only uses the single address derived from the active privkey. All coins get an address but they are based on the same privkey. Funds deposited to this smartaddress, automatically become eligible for trading. Notice that all funds are only spendable by the user with the passphrase, and that its privkey is imported into any local wallets. This allows using the normal coin daemon to do transactions, but be careful if you do to not use the same UTXO as being used by a pending swap!

Atomic Swaps

barterDEX implements the Tier Nolan protocol as described in the bitcointalk thread.

Overview of atomic swaps protocol

While the thread is quite technical, it gives a very good background into the tradeoffs that went into selecting the atomic swap protocol. The important thing to note is that at each step of the protocol there are incentives/disincentives to proceed to the next step and that regardless of where the protocol stops, each party ends up with what they should get. The understanding is that if you don’t follow the protocol, you will end up paying some amount of penalty.

In order to achieve this, the liquidity provider, who we call bob, needs to have a deposit to ensure his completion of the protocol. This means that bob needs two UTXOs to do an atomic swap. alice also needs two UTXOs, but her additional UTXO is the dexfee that is required to prevent spamming the orderbook. Without this, alice could initiate an unlimited number of atomic swaps and the bobs would all be simply stuck waiting for the time period to expire to get a refund of their deposit. With the dexfee there is a financial cost to alice for such bad behavior since there is no financial gain for alice to be annoying, we expect that there won't be much intentional spamming.

Ignoring all the validation details of each step, the atomic swap consists of up to 7 transactions, in some cases, it would be less. The following shows the mainstream SWAP complete! the sequence for both sides:

1. alice sends dexfee
2. bob sends bobdeposit
3. alice sends alicepayment
4. bob sends bobpayment
5. alice spends the bobpayment
6. bob spends the alicepayment
7. bob refunds his own deposit

While it seems a bit inefficient to have 7 transactions for a swap that could be done with just 2 transactions, this is what is required to make it trustless and have the characteristic that at any step, there are incentives to go to the next step and where both sides end up with the right amounts regardless of where things stop.

Let us see what happens if things just stop at a certain step:

1. alice sends dexfee. If bob does not send the bobdeposit, alice is out a dexfee, which is 1/777 of the transaction amount. This will then give bob a bad reputation and very quickly nobody will trade with bob. As long as the frequency of bob failing to deposit is low, the occasional extra dexfee is a minor issue. Contingency plans are in place to provide refunds if a particular alice node experiences a materially large amount of lost dexfees.
2. bob sends bobdeposit. If alice doesn't send the alicepayment, then alice loses not only the dexfee but gains a bad reputation and soon nobody would trade with alice. We don't expect this to happen that often.
3. alice sends alicepayment. If bob doesn't send in payment, after 4 hours, alice can claim the bobdeposit, which is 12.5% larger than the payment, so alice ends up with a nice bonus in this case. I would not be surprised if the alice nodes are eager for this case of atomic swap protocol.
4. bob sends bobpayment. If alice doesn't spend the bobpayment, then after 2 hours he can reclaim his payment and then after 4 hours refund his deposit. Once bob refunds his own deposit, then alice is able to reclaim her payment. It is all intricately interconnected as the spending of a specific transaction enables the other party to spend their counterpart.
5. alice spends the bobpayment. If bob doesn't spend the alicepayment, alice is already done with the trading, so there is no more she needs. Bob is sleeping and doesn't spend the alicepayment, then he is out the alicepayment until he spends it. this is up to bob, but it is a bit dangerous as if he does the refund of the deposit before spending alicepayment, alice would get the info needed to reclaim her payment. It is important for both participants to continue running the atomic swap protocol until it completes. If after 4 hours, bob is still sleeping, then alice is able to claim the deposit and become a happy camper. alice spending the bob deposit, however, does not give her the information needed to reclaim her own payment, so bob is still able to do this when he wakes up.
6. bob spends the alicepayment. Similar to above, if bob doesn't refund his own deposit, it is his loss and purely his responsibility. If after 4 hours, he still hasnt, then alice will be able to claim the deposit.
7. bob refunds his own deposit. As you can see at each step, the side that needs to do something is motivated to do so, with greater and greater urgency toward the end.

barterDEX implements the above in a cross-platform way, across almost a hundred coins, using either native coin daemon or SPV electrum servers. A swap that is not completed during one session can be completed as long as barterDEX is run before the time expires. It is best to not trade a very large amount unless you are sure of your node's reliability, especially the internet connection.

Believe it or not, doing the above atomic swap protocol with all the cryptographic validations in between along with a fancy key exchange, is less than half the difficulty of barterDEX. Relatively speaking, it is "easy" to do an atomic swap in isolation between two test nodes with carefully prepared UTXOs made especially for the test. It is an entirely different matter to be able to let anybody start trading with anybody else and have things like orderbooks and ordermatchinghappen. Due to the peer to peer nature, it is impossible to guarantee a successful swap, however, a failed swap to start is just a few seconds of lost time and there is no cost to try to start a swap. Just like in normal trading, there is no guarantee that you can get the trade you want, similarly, there is no guarantee with barterDEX.

Detailed explanation of atomic swaps protocol

Let us see what is required in a bit more detail as we now have the context of the atomic swap protocol. In order to even start an atomic swap, there needs to be a pair from alice so the dexfeeand alicepayment can be created and also two from bob, so the bobdeposit and bobpaymentcan be created. barterDEX requires all four of these UTXOs to be specified before the start of the atomic swap protocol.

Here comes the first user issue. Most users don't even know what a UTXO is and most view their balance as a single blob of coins they can spend at the satoshi level. The reality is that bitcoin protocol maintains a list of Unspent Transaction Outputs (UTXO) of specific values and to make a transaction, there needs to be inputs sufficient to pay for the outputs. Any excess goes into a change output (let us ignore txfees for now, even though barterDEX automatically calculates the current BTC txfee to pay that will get confirmed quickly).

It is not practical to have the user specify which UTXO pair to use, and it is not possible for alice to even know what UTXOs bob has available at the moment of negotiating a trade. What barterDEX does is an atomic swap negotiation protocol as follows:

1. alice sends a "request" to a specific bob with her pair of UTXOs, price and volume
2. bob validates the "request" to make sure the alice UTXOs are valid and that the price is acceptable, then bob scans all his UTXOs for the most efficient way to create both the bobpayment and bobdeposit UTXOs. The constraint is that it needs to match the price alice wants to pay and the volume and the deposit at least 12.5% bigger than the payment. If all these things are met, the bob sends back a "reserved" packet to alice. By doing this just in time, bob minimizes the funds that are tied up doing deposit duty.
3. alice validates the "reserved" packet from bob, making sure all the UTXOs are valid, the price and volumes are acceptable and if so sends a "connect" packet to bob with the same parameters as in the "reserved". Between the "request" being sent and the "reserved" being received or a 10-seconds timeout, alice is prevented from making any other trade request. It is important to make sure the current pending atomic swap is properly started and this prevention is also part of the whale resistance for dICO.
4. bob validates the "connect" and if all is well, starts a new thread to do the atomic swap.
5. alice receives the "connect" and if all is well, starts a new thread to do the atomic swap.

There is one more "negotiation" step that is needed between alice and bob and while it could have been part of the 5 steps above, due to legacy reasons it ended up inside the atomic swap protocol itself. In the event there is no consensus on the coin confirmations to use, the atomic swap aborts without any payments being sent. No harm, no foul.

DEX fee - dexfee

People will notice that there is a small dexfee as part of the barterDEX protocol. This is 1/777 of the transaction amount and it is calibrated to make spam attacks impractical. Impractical as in costing real money. Without this spam prevention, the barterDEX could be cost-effectively DOS attacked at the protocol level.

The 1/777 ends up be 0.1287%, this is less than almost all the centralized exchanges, in many cases by a significant margin. Please note that the central exchanges charge both sides of the trade, so even if they charge 0.2%, it is actually 0.4% total fees.

The dexfee helps secure the barterDEX network and it is set at a level that is less than the central exchanges. It is possible that some trades can start without completing and since the dexfee is charged first in the protocol. In this sense, there would be a dexfee charged for these failed atomic swaps. While the proxy DEX charge for every bid and every ask, even if a trade doesn't happen at all, this is a big negative for trading on the proxy DEX systems.

However, it should not be looked upon in isolation. The barterDEX protocol is based on statistics and statistically, there will be some percentage of atomic swaps that are started that won't complete. Let us say this is a 15% failure rate (really this is much higher than we are seeing in testing, where 95%+ of atomic swaps that are started complete, at least to the bobdeposit phase), then the effective dexfee cost is still 0.15%

So, if you see a dexfee transaction for an atomic swap that doesn't complete, know that it is all part of the statistical process. If you end up paying more than 0.15% of completed trades in dexfee, please let us know, this is not an expected outcome and we will want to find and fix the cause.

This is why even though the 1/777 ratio is 0.1287%, it is better to state the dexfee as 0.15%

Fees are collected and distributed to DEX asset holders, which is an assetchain. Any DEX assetchain unit holder will receive this DEX fee as a dividend.

Transaction Confirmations

Since barterDEX is trading real coins and not just updating an internal database (or a proxy tokens account balance for proxy DEX), both sides need to wait for coin confirmations to the level they are comfortable. Since the payments sent on one chain won't be reorganized if the other chain does, it is important to have enough confirmations for the size of the trade being done. In order to enable this, there is a setconfirms API call that can be called for each coin. This needs to be done before the atomic swap is started as the current numconfirms for the coin will be sent to the other side and the larger of alice or bob's numconfirms will be used. There is also a maxconfirms value to prevent one side from specifying something crazy like 100 BTC confirms!

Zero Transaction Confirmations

There is one extreme mode in this area where zero confirms (zeroconf) can be set! Now it is quite risky to do this, especially for fast blocktime coins with low hashrate. However, for internal testing, or trading between friends, it becomes a lot more fun to see an atomic swap complete from start to finish in 13 seconds. The idea is that between people that agree to make things right in case of unexpected blockchain reorgs, if the people trust each other enough that the other party will do what is needed to do to make things right, then zeroconf trading would be enabled. There is a special trust API to set positive trust. If set negative, that pubkey is blacklisted.

Real-time Metrics

One last aspect of the ordermatch process is the real-time metrics (RTmetrics) that are used to filter the possible candidates for matching. All the nodes are tracking global stats via the stats.logfile and this allows each node to update the list of pending swaps. Using this information, less priority is given to nodes that are busy. Additionally, alice gives less preference to bobs that don't have the right range of UTXO sizes in the orderbook. This part is still quite new and can be enhanced a lot in the next barterDEX iteration.

Efficiency of Orderbook

We have now worked backward from the atomic swap details to the ordermatch process and this leaves the efficient orderbook propagation as the only part left to describe. barterDEX uses a convention of base/rel meaning base currency converted to rel currency. Buying a base/relmeans to use rel currency to buy base currency, price denominated in base/rel.

In order to construct an orderbook a node needs to have price information and since everything is pubkey based, this means a price from a pubkey. Ultimately a specific txid/vout (UTXO) is needed, but a single node could have hundreds of UTXOs and this would use up a lot of network bandwidth to propagate it globally. barterDEX, therefore, uses a hierarchical orderbook, where the skeleton of it is just the pubkey/price for a particular base/rel pair. Note that a buy of base/relat price is the same as a sell of rel/base at 1/price. So all that is needed to populate the orderbook skeleton is for a node to broadcast its pubkey and price for a base/rel pair. Given this, nodes that are running a local coin daemon can instantly find the possible list of UTXOs via listunspent... oops, bitcoin nodes don't fully index by address, so actually this is not available service and what is needed is for a node to also broadcast its list of UTXOs and this is done in the background on-demand.

Critical information is fully signed to prevent spoofing, so all nodes can verify the smartaddressassociated with a pubkey and also that the price being broadcast is a valid price. The electrum SPV coins do a specific SPV validation for all UTXO before they are approved for trading.

If all nodes were always broadcasting all their UTXOs to everybody, it would rapidly lead to congestion. Most of the time barterDEX just relies on the pubkey/prices and this is enough to create useful orderbooks. Since there are N*N possible orderbooks given N currencies, it is not practical to be updating all possible orderbooks, instead, they are created when requested from the raw data. During the orderbook creation, if the top entries in the orderbook don't have any listunspent data, a request for it is made to the network.

This process ensures that by the time a trade is done, already an orderbook has been requested which in turn requests the listunspent data for the most likely pubkeys. The actual ordermatchprocess then iterates through the orderbook scanning all the locally known UTXOs to find a high probability counterparty to make the "request" offer to. In practice, we are seeing the nearly instantaneous response when all the parameters are properly met.

The above is a high-level summary of the barterDEX that is already implemented and live.Details are subject to change, but as of 29 October, 2017 barterDEX has reached feature complete and ready at the core level for the upcoming Monaize dICO. This dICO will be a trial by fire so to speak with potentially a large number of atomic swaps invoked at the same time. Current stress testing indicates that the expected load will be able to be handled, the only issues would be if we get unexpectedly high volumes...

barterDEX will continue to evolve and this iteration has identified a few areas of improvement for the next iteration. With several different GUI being built on top of the barterDEX 1.0 API, new iterations will maintain backward compatibility in the API.

Acknowledgements

References

BarterDEX – A Practical Native DEX https://github.com/SuperNETorg/komodo/wiki/ BarterDEX-%E2%80%93-A-Practical-Native-DEX

Nakamoto Satoshi (2008): Bitcoin: A peer-to-peer electronic cash system.http://www.bitcoin.org/bitcoin.pdf

Mtchl (2014): The math of Nxt forging https://www.docdroid.net/ahms/forging0-4-1.pdf.html

King Sunny, Nadal Scott (2012): PPCoin: Peer-to-Peer Crypto-Currency with Proof-of-Stakehttps://peercoin.net/assets/paper/peercoin-paper.pdf

Delegated Proof-of-Stake Consensus https://bitshares.org/technology/ delegated-proof-of-stake-consensus/

Miers Ian, Garman Christina, Green Matthew, Rubin Aviel: Zerocoin: Anonymous Distributed E-Cash from Bitcoin https://isi.jhu.edu/~mgreen/ ZerocoinOakland.pdf

Ben-Sasson Eli, Chiesa Alessandro, Garman Christina, Green Matthew, Miers Ian, Troer Eran, Virza Madars (2014): Zerocash: Decentralized Anonymous Payments from Bitcoin http://zerocash-project.org/media/pdf/ zerocash-extended-20140518.pdf

Ben-Sasson Eli, Chiesa Alessandro, Green Matthew, Tromer Eran, Virza Madars (2015): Secure Sampling of Public Parameters for Succinct Zero Knowledge